Five points to consider in the design process of bridge lighting engineering

Bridges play an important role in modern transportation, and more and more people choose to travel at night. Therefore, lighting on bridges not only provides basic illumination for pedestrians and vehicles, but also adds a beautiful color to the night view of the entire city.
In bridge lighting engineering, the determination of the position of the lighting fixtures and their subsequent maintenance are crucial. Firstly, it is necessary to plan the layout and quantity of lighting fixtures reasonably based on the structural characteristics and lighting requirements of the bridge. This includes considering factors such as the illumination angle of the lamp, the uniformity of the light, and avoiding glare. At the same time, it is also necessary to consider the maintenance issues of the lighting fixtures in the later stage, such as replacing light bulbs, repairing circuits, etc. Therefore, the selection of the location of the lighting fixtures should be easy for maintenance personnel to operate.
The damage caused by pipeline layout in bridge lighting engineering to bridges is a problem that needs to be taken seriously. During the construction process, it is necessary to avoid causing damage to the bridge structure as much as possible. This can be achieved through a reasonable pipeline layout plan, such as using concealed wiring and other measures to reduce damage to the bridge structure.
Most of the lighting fixtures on the bridge are exposed, so protective measures such as anti-aging and rain protection should be taken for lighting fixtures and pipelines. Waterproof sealing materials can be used to encapsulate the lighting fixtures to prevent moisture from entering the interior and causing aging. At the same time, anti-aging coatings can be applied to the surface of the lamps to extend their service life.
The safety of construction personnel during the installation of lighting fixtures is also very important. Due to the fact that most lighting projects involve high-altitude operations, construction and installation personnel must pay attention to wearing safety helmets, fastening safety ropes, and other protective measures during work. In addition, relevant safety training and operation guidance are needed to ensure that construction personnel can correctly use safety equipment and avoid accidents.
5. When fixing the lighting fixtures, a principle must be followed, which is not to damage the building itself and its aesthetics. However, the installation of lighting fixtures often requires drilling for fixing, and a careless drilling can damage the building itself, leading to problems such as water leakage in rainy days. Therefore, it is necessary to be very careful and cautious during the punching process, choose the appropriate location and method for punching, and take corresponding waterproof measures to ensure that it will not cause damage to the building itself.

E-mail :
123910881@qq.com

WhatsApp：
+86-18933345844

Address：
The First Card of Caoyihai Yuansha Industrial Zone,Guzhen Town, Zhongshan City, Guangdong Province